Installation
HYBRID / BATTERY CONTROL: HV RELAY ASSEMBLY: INSTALLATION
1. INSTALL HYBRID BATTERY JUNCTION BLOCK ASSEMBLY
CAUTION:
Wear insulated gloves.
(a) Install the hybrid battery junction block assembly with the 3 bolts.
Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)
(b) Connect the connector to the hybrid battery junction block assembly.
NOTICE:
The connector should be connected securely.
(c) Using an insulated tool, install the 2 bolts.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
NOTICE:
Be sure to use a torque wrench to tighten the bolts.
(d) Connect the terminal cover.
NOTICE:
The terminal cover should be connected securely.
2. INSTALL NO. 1 HYBRID BATTERY SHIELD SUB-ASSEMBLY
CAUTION:
Wear insulated gloves.
(a) Install the No. 1 hybrid battery shield sub-assembly with the bolt and 3 nuts.
Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)
(b) Connect the connector.
NOTICE:
The connector should be connected securely.
3. CONNECT NO. 4 FLOOR WIRE
CAUTION:
Wear insulated gloves.
(a) Connect the 2 connectors.
NOTICE:
* Make sure that the ends of the No. 4 floor wire do not cross over each other.
* The connector should be connected securely.
Text in Illustration
(b) Connect the shielded wire ground.
NOTICE:
* Be sure to align the claw of the shielded wire ground with the hole.
* Be sure to install the shielded wire ground in the correct direction.
4. INSTALL NO. 4 HYBRID BATTERY SHIELD PANEL
CAUTION:
Wear insulated gloves.
(a) Install the No. 4 hybrid battery shield panel with the bolt and 2 nuts.
Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)
(b) Install the battery cover lock striker, then push the button to lock it.
Text in Illustration
5. INSTALL NO. 1 ROOM PARTITION BOARD Rear Seat Reclining Control Cable
6. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY Installation
7. INSTALL REAR SEAT SHOULDER BELT COVER Installation
8. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER Installation
9. INSTALL CENTER STOP LIGHT SET Installation
10. INSTALL ROOF SIDE INNER GARNISH LH Installation
11. INSTALL ROOF SIDE INNER GARNISH RH Installation
12. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH Installation
13. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH Installation
14. CONNECT REAR SEAT OUTER BELT ASSEMBLY (for LH Side) Installation
15. CONNECT REAR SEAT OUTER BELT ASSEMBLY (for RH Side) Installation
16. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH Installation
17. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH Installation
18. INSTALL REAR SIDE SEATBACK ASSEMBLY LH Installation
19. INSTALL REAR SIDE SEATBACK ASSEMBLY RH Installation
20. INSTALL REAR SEATBACK ASSEMBLY LH Installation
21. INSTALL NO. 2 ROOM PARTITION COVER Installation
22. INSTALL REAR SEATBACK ASSEMBLY RH Installation
23. INSTALL REAR SEAT CUSHION LOCK HOOK Installation
24. INSTALL REAR SEAT CUSHION ASSEMBLY Installation
25. INSTALL SERVICE PLUG GRIP
Installation