Installation

HYBRID / BATTERY CONTROL: SERVICE PLUG GRIP: INSTALLATION

1. INSTALL SERVICE PLUG GRIP

CAUTION:
Wear insulating gloves.

NOTICE:
Before connecting the service plug, check that no parts and tools remain and that the high voltage terminals and connectors are connected securely.

(a) Wear insulated gloves and install the service plug grip in the order shown in the illustration.





(b) Rotate the handle of the service plug grip 90° toward the battery and slide it in the direction shown by the arrow until a click sound is heard.

2. INSTALL NO. 8 HYBRID VEHICLE BATTERY SHIELD PANEL

(a) Install the No. 8 hybrid vehicle battery shield panel with the 2 nuts.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

3. INSTALL LUGGAGE COMPARTMENT FRONT TRIM COVER Installation

4. INSTALL BAGGAGE HOLDER NET (w/ Partition Net) Installation

5. INSTALL SPARE WHEEL COVER ASSEMBLY Installation

6. INSTALL LUGGAGE COMPARTMENT FLOOR MAT Installation

7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

8. INSTALL LUGGAGE TRIM SERVICE HOLE COVER Installation