Selector Mechanism, Assembly Overview
Selector Mechanism, Assembly Overview
Before working with engine running, place selector lever in "P" position and engage parking brake.
1 Selector lever cable
• Do not bend or kink
• => [ Selector Lever Cable, Assembly Overview ] Description and Operation
• => [ Selector Lever Cable ] Service and Repair
• => [ Selector Lever Cable, Adjusting ] Adjustments
2 Securing plate
• Assembly instructions => [ Selector Lever Cable, Assembly Overview ] Description and Operation
3 Selector lever cable screws
• Assembly instructions => [ Selector Lever Cable, Assembly Overview ] Description and Operation
4 Clamp
• For securing selector lever handle to selector lever
• Removing and installing => [ Selector Lever Knob, Assembly Overview ] Selector Lever Knob, Assembly Overview
5 Selector lever boot
• Separate from selector lever handle => [ Selector Lever Knob, Assembly Overview ] Selector Lever Knob, Assembly Overview
6 Trim ring
• Removing and installing => [ Separating selector lever boot
from selector lever handle ] Selector Lever Handle
7 Selector lever handle
• => [ Selector Lever Knob, Assembly Overview ] Selector Lever Knob, Assembly Overview
• => [ Selector Lever Handle ] Selector Lever Handle
8 Selector Lever Transmission Range (TR) Position Display (Y26)
• Removing and installing => [ Selector Lever Transmission Range Position Display ] Selector Lever Transmission Range Position Display
9 Bolt
• 1 Nm
• Qty. 4
10 Selector Lever Sensor System Control Module (J587) with Tiptronic Switch (F189)
• Removing and installing => [ Selector Lever Sensor System Control Module with Tiptronic Switch ] Selector Lever Sensor System Control Module With Tiptronic Switch
11 Shift lock solenoid (N110)
• Removing and installing => [ Shift Lock Solenoid ] Service and Repair
• => [ Selector Mechanism, Performing Emergency Release ] Procedures
12 Selector mechanism function unit
• Check function: => [ Selector Mechanism, Checking ] Testing and Inspection
• => [ Selector Mechanism Unit ] Selector Mechanism Unit
• => [ Shift Mechanism Unit ] Overhaul
• With Transmission Park Selector Switch (F305) installed, => [ Transmission Park Selector Switch ] Service and Repair
13 Bolt
• 6.5 Nm
• Qty. 4
• For securing selector mechanism function unit to shift unit
• With additional threads on bolt head for securing bracket to center console
14 Bolt
• 6.4 Nm
• Qty. 2
• For securing center bracket to lower selector mechanism cover
15 Bolt
• 10 Nm
• Qty. 4
• For securing selector mechanism shift unit to body
16 Selector mechanism shift unit
• => [ Selector Mechanism Shift Unit ] Selector Mechanism Shift Unit
17 Center bracket
• Must not be reinstalled if damaged or removed, is only necessary for factory production