Shift Cable: Description and Operation

Selector Lever Cable, Assembly Overview






1 Selector lever cable

• Do not bend or kink

• => [ Selector Lever Cable ] Service and Repair

• In case of damaged rubber boot, selector lever cable must be replaced

• Ball socket and ball head must be free of oil and grease

• Check whether selector lever cable rubber boot is engaged in selector mechanism shift unit and is sealed properly

• => [ Selector Lever Cable, Adjusting ] Adjustments

2 Retaining clip

• For selector lever cable to selector mechanism function unit

• Always replace

3 Bolt

• 13 Nm

• For adjusting selector lever cable

4 Selector lever cable bolts

• The plastic retaining spring on adjustment slide must lock the pins so that they cannot fall out.

5 Adjustment slide

6 Selector shaft lever

• Ball socket and ball head must be free of oil and grease

• => [ Selector Shaft Lever ] Selector Shaft Lever

7 Mounting bracket

• For selector lever cable

8 Bolt

• 10 Nm

• Attaching bracket to transmission

9 Retaining clip

• For selector lever cable to bracket

• Always replace

10 Bolt

• 10 Nm

• Attaching bracket to transmission