Removal (from 07/2011)

C50 MANUAL TRANSMISSION / TRANSAXLE: TRANSMISSION CONTROL CABLE (for Hatchback): REMOVAL

1. REMOVE REAR CONSOLE BOX ASSEMBLY

Removal (from 07/2011)

2. REMOVE AIR CLEANER CAP W/ AIR CLEANER HOSE Removal (from 07/2011)

3. REMOVE FRONT FLOOR CENTER BRACE (w/ Side Mudguard) Removal (from 07/2011)

4. REMOVE FRONT EXHAUST PIPE ASSEMBLY Removal (from 07/2011)

5. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR





(a) Remove the 2 bolts and nut, and then remove the front No. 1 floor heat insulator.

6. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY





(a) Remove the clip A, and separate the control select cable from the floor shift shift lever assembly.

Text in Illustration





(b) Disengage the clip B, and separate the control shift cable from the floor shift shift lever assembly.

(c) Rotate the nut clockwise approximately 180° and, while holding the nut in that position, separate the control select cable from the shift lever plate.

NOTICE:
Do not rotate the nut excessively as it may damage the internal spring and the transmission control cable assembly will not be reusable.

(d) Rotate the nut clockwise approximately 180° and, while holding the nut in that position, separate the control shift cable from the shift lever plate.

NOTICE:
Do not rotate the nut excessively as it may damage the internal spring and the transmission control cable assembly will not be reusable.

7. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

(a) Remove the clip A and washer, and separate the control shift cable from the manual transaxle assembly.





Text in Illustration





(b) Remove the clip B from the control shift cable, and separate the control shift cable from the shift cable bracket.

(c) Remove the clip A and washer, and separate the control select cable from the manual transaxle assembly.

(d) Remove the clip B from the control select cable, and separate the control select cable from the shift cable bracket.

(e) Remove the 3 nuts and remove the transmission control cable assembly.