Removal

SEAT BELT: FRONT PASSENGER SEAT BELT WARNING LIGHT: REMOVAL

1. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Removal

2. REMOVE REAR DECK FLOOR BOX Removal

3. REMOVE REAR NO. 3 FLOOR BOARD Removal

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY Removal

6. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

7. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

8. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

9. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

w/ Daytime Running Light: Removal

w/o Daytime Running Light: Removal

10. REMOVE NAVIGATION RECEIVER WITH BRACKET (for Navigation Receiver Type) Removal

11. REMOVE NO. 1 SIDE DEFROSTER NOZZLE Removal

12. REMOVE NO. 2 INSTRUMENT PANEL REGISTER Removal

13. REMOVE GLOVE COMPARTMENT DOOR Removal

14. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

15. REMOVE PASSENGER SEAT BELT WARNING LIGHT ASSEMBLY

(a) Disengage the 2 claws and remove the passenger seat belt warning light assembly as shown in the illustration.