Installation

AUDIO / VIDEO: RADIO RECEIVER: INSTALLATION

1. PRECAUTION (w/o Daytime Running Light)

NOTICE:
When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

2. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Daytime Running Light)

3. INSTALL NAVIGATION ECU SUB-ASSEMBLY (w/o Daytime Running Light)

4. INSTALL EXTENSION MODULE (w/ Daytime Running Light)

w/ Navigation System: Installation

5. INSTALL HARD DISK DRIVE (w/o Daytime Running Light) Installation

6. INSTALL NO. 2 RADIO BRACKET (w/ Daytime Running Light)

(a) w/o Navigation System:

(1) Install the No. 2 radio bracket with the 3 bolts.

(b) w/ Navigation System:

(1) Install the No. 2 radio bracket with the 5 bolts.

7. INSTALL NO. 1 RADIO BRACKET (w/ Daytime Running Light)

(a) w/o Navigation System:

(1) Install the No. 1 radio bracket with the 3 bolts.

(b) w/ Navigation System:

(1) Install the No. 1 radio bracket with the 5 bolts.

8. INSTALL NO. 2 RADIO BRACKET (w/o Daytime Running Light) Installation

9. INSTALL NO. 1 RADIO BRACKET (w/o Daytime Running Light) Installation

10. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/ Daytime Running Light)

(a) Connect each connector.

(b) Engage the 4 claws as shown in the illustration.

(c) Install the radio and display receiver assembly with bracket with the 4 bolts.

11. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/o Daytime Running Light)

(a) Connect each connector.

(b) Engage the 4 claws as shown in the illustration.

(c) Install the radio and display receiver assembly with bracket with the 4 bolts.

12. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

13. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

14. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

15. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY Installation

16. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

17. INSTALL REAR NO. 3 FLOOR BOARD Installation

18. INSTALL REAR DECK FLOOR BOX Installation

19. INSTALL REAR NO. 2 FLOOR BOARD Installation

20. INSPECT HARD DISK DRIVE (w/o Daytime Running Light)

Operation Check