Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER: INSTALLATION

1. PRECAUTION

NOTICE:
When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

2. INSTALL NAVIGATION ECU SUB-ASSEMBLY

3. INSTALL HARD DISK DRIVE Installation

4. INSTALL NO. 2 RADIO BRACKET

(a) Install the No. 2 radio bracket with the 4 screws.

5. INSTALL NO. 1 RADIO BRACKET

(a) Install the No. 1 radio bracket with the 4 screws.

6. INSTALL NAVIGATION RECEIVER WITH BRACKET

(a) Engage the 4 claws and temporarily install the navigation receiver with bracket as shown in the illustration.





(b) Install the navigation receiver with bracket with the 4 bolts.

7. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

8. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

9. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

10. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY Installation

11. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. INSTALL REAR NO. 3 FLOOR BOARD Installation

13. INSTALL REAR DECK FLOOR BOX Installation

14. INSTALL REAR NO. 2 FLOOR BOARD (for Separate Type) Installation

15. INSPECT HARD DISK DRIVE

Operation Check