Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER: INSTALLATION

1. PRECAUTION

NOTICE:
When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

2. INSTALL NAVIGATION COMPUTER SUB-ASSEMBLY

3. INSTALL HARD DISK DRIVE Installation

4. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation

5. INSTALL NO. 1 RADIO RECEIVER BRACKET

(a) Install the No. 1 radio receiver bracket with the 5 screws.

6. INSTALL NO. 2 RADIO RECEIVER BRACKET

(a) Install the No. 2 radio receiver bracket with the 5 screws.

7. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY

(a) Connect each connector.

(b) Engage the 8 clips to the vehicle body to temporarily install the navigation receiver assembly with air conditioning control assembly.

(c) Install the navigation receiver assembly with air conditioning control assembly with the 4 bolts.

8. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation

10. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

11. INSTALL BOX BOTTOM MAT Installation

12. INSTALL REAR CONSOLE BOX ASSEMBLY

Installation

13. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

14. INSTALL LUGGAGE TRIM SERVICE HOLE COVER Installation

15. INSPECT HARD DISK DRIVE

Operation Check

16. REPLACED OPERATION (w/ Parking Assist Monitor System)

Calibration