Installation

NAVIGATION / MULTI INFO DISPLAY: HARD DISK DRIVE: INSTALLATION

1. PRECAUTION

NOTICE:
When installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.

2. INSTALL HARD DISK DRIVE

(a) Insert the hard disk drive in the direction shown by the arrow in the illustration to install it.





(b) Engage the 2 guides to temporarily install the cover.

(c) Install the cover with the 2 screws.

3. INSTALL NO. 2 RADIO RECEIVER BRACKET (for Navigation Receiver Type) Installation

4. INSTALL NO. 2 RADIO RECEIVER BRACKET (for Radio and Display Type with Intuitive Parking Assist System) Installation

5. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Navigation Receiver Type) Installation

6. INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio and Display Type with Intuitive Parking Assist System) Installation

7. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

8. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation

9. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

10. INSTALL BOX BOTTOM MAT Installation

11. INSTALL REAR CONSOLE BOX ASSEMBLY

Installation

12. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

13. INSTALL LUGGAGE TRIM SERVICE HOLE COVER Installation

14. INSPECT HARD DISK DRIVE

for Navigation Receiver Type: Operation Check

for Radio and Display Type with Intuitive Parking Assist System: Operation Check