Removal

FA20 COOLING: COOLING FAN MOTOR: REMOVAL; 2013 MY FR-S [03/2012 -]

1. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

2. REMOVE FRONT BUMPER COVER

Removal

3. REMOVE AIR CLEANER DUCT Removal

4. REMOVE RADIATOR COVER PLATE Removal

5. REMOVE RADIATOR RESERVE TANK ASSEMBLY Removal

6. REMOVE WATER FILLER SUB-ASSEMBLY

(a) Remove the 4 bolts and separate the water filler sub-assembly.





7. DISCONNECT HOOD LOCK ASSEMBLY Removal

8. REMOVE RADIATOR SUPPORT SUB-ASSEMBLY Removal

9. REMOVE FAN SHROUD

(a) Disconnect the 2 wire harness clamps and the 2 cooling fan motor connectors.









NOTICE:
Be careful not to damage the connectors.

(b) Mark the sponge on the upper surface of the fan shroud, and use scissors, etc. to cut the sponge.





HINT
Cut the radiator packing at the position between the corner of the radiator packing and the edge of the fun shroud.









(c) Detach the 2 claws and separate the fan shroud from the radiator assembly.













HINT
Insert a cardboard or a blanket between the radiator assembly and the fan shroud to protect the radiator assembly.

(d) Remove the fan shroud from the radiator assembly.





NOTICE:
Do not apply any excessive force to the outlet radiator hose, inlet radiator hose, No.1 radiator hose, pipe or water filler sub-assembly when removing the fan shroud.

10. REMOVE FAN

(a) Remove the nut and fan.





11. REMOVE NO. 2 FAN

(a) Remove the nut and No. 2 fan.





12. REMOVE COOLING FAN MOTOR

(a) Disengage the connector clamp, and disconnect the connector from cooling fan motor.





(b) Remove the 3 screws and cooling fan motor.





13. REMOVE NO. 2 COOLING FAN MOTOR

(a) Remove the 3 screws and the No. 2 cooling fan motor.