Procedures

Transmission Oil Lines and Cooler, Cleaning

Special tools, testers and auxiliary items required

• Oil Collecting and Extracting Device (V.A.G 1782)

• Hose dia. approximately 18 mm

• Compressed air gun, commercially available

• Protective glasses

Procedure

- Place the Oil Collecting and Extracting Device (V.A.G 1782) the separating joint.

- Before installing a replacement transmission, always clean out the transmission oil lines and cooler with compressed air (maximum 10 bar).

• If heavily contamination in the transmission oil comes out, the transmission oil lines and cooler must also be flushed with clean transmission oil.

• Transmission fluid lines, removing and installing: front. Refer to => [ Front Transmission Oil Lines ] Front Transmission Oil Lines, rear => [ Rear Transmission Oil Lines ] Rear Transmission Oil Lines.