Removal

HEATING / AIR CONDITIONING: SOLAR VENTILATION ECU: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Removal

3. REMOVE REAR DECK FLOOR BOX Removal

4. REMOVE REAR NO. 3 FLOOR BOARD Removal

5. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY Removal

7. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

8. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

9. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

10. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

w/ Daytime Running Light: Removal

w/o Daytime Running Light: Removal

11. REMOVE NAVIGATION RECEIVER WITH BRACKET (for Navigation Receiver Type) Removal

12. REMOVE AIR CONDITIONING CONTROL ASSEMBLY Removal

13. REMOVE SOLAR VENTILATION ECU

(a) Remove the bolt.





(b) Disconnect the connector to remove the solar ventilation ECU.