Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: INSTALLATION

1. INSTALL EXTENSION MODULE

(a) Connect the connector to install the extension module.

(b) Connect each connector to install the navigation wire.

2. INSTALL NO. 2 RADIO BRACKET Installation

3. INSTALL NO. 1 RADIO BRACKET Installation

4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET Installation

5. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation

6. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation

7. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation

8. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY Installation

9. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

10. INSTALL REAR NO. 3 FLOOR BOARD Installation

11. INSTALL REAR DECK FLOOR BOX Installation

12. INSTALL REAR NO. 2 FLOOR BOARD (for Separate Type) Installation