Installation

HYBRID / BATTERY CONTROL: BATTERY BLOWER: INSTALLATION

1. INSTALL BATTERY COOLING BLOWER ASSEMBLY

NOTICE:
* Be sure not to touch the fan part of the battery cooling blower assemblies.
* Do not lift the battery cooling blower assemblies using the wire harness.

(a) Install the battery cooling blower assembly with the 2 bolts and nut.





Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(b) Connect each battery cooling blower assembly connector and clamp.

(c) Connect the 3 wire harness clamps.





2. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT Installation

3. INSTALL REAR SIDE SEAT BACK ASSEMBLY RH Installation

4. INSTALL REAR DOOR SCUFF PLATE RH

HINT
Use the same procedure described for the LH side Installation.

5. INSTALL NO. 1 HYBRID BATTERY EXHAUST DUCT Installation

6. INSTALL REAR FLOOR BOARD SPACER Installation

7. INSTALL REAR NO. 1 FLOOR BOARD Installation

8. INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY Installation

9. INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY Installation

10. INSTALL REAR SEAT CUSHION ASSEMBLY Installation