Installation

SEAT: REAR SEAT ASSEMBLY: INSTALLATION

1. INSTALL REAR SEATBACK ASSEMBLY RH

(a) Place the rear seatback assembly RH in the cabin.

NOTICE:
Be careful not to damage the vehicle body.

(b) Install the rear seatback assembly RH with the 2 bolts.

Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

(c) Engage the fastener.

(d) Raise the rear seatback assembly RH.

2. INSTALL REAR SEATBACK ASSEMBLY LH

(a) Place the rear seatback assembly LH in the cabin.

NOTICE:
Be careful not to damage the vehicle body.

(b) Install the rear seatback assembly LH with the 2 bolts.

Torque : 37 Nm (377 kgf-cm, 27 ft-lbf)

(c) Engage the fastener.

(d) Raise the rear seatback assembly LH.

3. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY

(a) Install the rear seat center headrest assembly.

4. INSTALL REAR SEAT HEADREST ASSEMBLY RH

(a) Install the rear seat headrest assembly RH.

5. INSTALL REAR SEAT HEADREST ASSEMBLY LH

(a) Install the rear seat headrest assembly LH.

6. CONNECT REAR CENTER SEAT BELT ASSEMBLY Installation

7. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

(a) Engage the 2 guides as shown in the illustration.





(b) Install the rear side seatback assembly RH with the bolt.

Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

8. INSTALL REAR SIDE SEATBACK ASSEMBLY LH

(a) Engage the 2 guides as shown in the illustration.





(b) Install the rear side seatback assembly LH with the bolt.

Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)

9. INSTALL REAR SEAT CUSHION ASSEMBLY

(a) Engage the 2 guides of the seat cushion to the seatback.





Text in Illustration





(b) Engage the 2 front hooks of the seat cushion to the vehicle body.

NOTICE:
When installing the seat cushion, make sure that the seat belt buckle is not under the seat cushion.

HINT
Confirm that the seat cushion is firmly installed.