Vehicle Stability Control System

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM:

DIAGNOSTIC TROUBLE CODE CHART

HINT: If a malfunction code is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, refer to DTC chart.

DTC chart of ABS:













- *1, *2:

- Even after the trouble areas are repaired, the ABS warning light will not go off unless the following operations are performed.

- *1:
1. Drive the vehicle at 12 mph (20 km/h) for 30 seconds or more and check that the ABS warning light goes off.
2. Clear the DTC.

HINT:
- In some cases, Techstream cannot be used when the ABS warning light remains on.
- When U0073/94, U0123/62, U0124/95 or U0126/63 are output, inspect and repair the trouble areas indicated by U0073/94, U0123/62, U0124/95 or U0126/63 first.

DTC chart of VSC:





Test mode DTC of ABS:





Test mode DTC of VSC:





HINT: In some cases, Techstream cannot be used when the VSC warning light remains on.