Power Take-Off Assembly Overview

Power Take-Off Assembly Overview





1 Power Steering Pump

2 Spring

3 Shaft Seal for the Power Steering Pump Drive

• Replacing, refer to => [ Power Steering Pump Drive Seal ] Power Steering Pump Drive Seal.

4 Semi-Circular Ring

• Installed location

• Replace if damaged

5 Bolt

• Tightening specification and sequence

6 A/C Compressor Driveshaft Seal

• Replacing, refer to => [ A/C Compressor Drive Shaft Seal, Replacing ] Service and Repair.

7 Dust Seal Cap for A/C Compressor Drive

8 Clamp

• Replace

• Must be appropriate for the model type

9 Driveshaft for A/C Compressor

10 Spur Gear Unit

• Do not disassemble

• Removing and installing, refer to => [ Spur Gear Unit ] Spur Gear Unit

11 O-ring

• Replace

12 Driveshaft for Oil Pump

13 Drive Spur Gear for Power Take-Off

• Cannot be replaced separately

14 Power Take-Off Drive Chain Sprocket

15 Bolt

• Tightening specifications - 4 - => [ Bolt ] Power Take-Off Drive Chain Assembly Overview

Spur Gear Unit, Tightening Specifications and Sequence





- Then tighten the bolts - 1 to 6 - diagonally in stages to 22 Nm.

Semi-Circular Seal Installation Location





• In the power steering pump drive - arrow -.