Center and Rear Mufflers Overview
Center and Rear Mufflers Overview
1 Bolt
• 23 Nm
2 Suspended Mount
• Replace if damaged.
3 Suspended Mount
• Replace if damaged.
4 Bolt
• 23 Nm
5 Suspended Mount
• Replace if damaged.
6 Nut
• 35 Nm
7 Front Clamping Sleeves
• Always replace.
• Installed position, refer to => [ Installed Position of the Front Clamping Sleeve ].
• Before tightening, align the exhaust system so that it is free of tension. Refer to => [ Exhaust System, Installing ] Service and Repair.
• Tighten the nuts evenly.
8 Nut
• 35 Nm
9 Front Clamping Sleeves
• Always replace.
• Installed position, refer to => [ Installed Position of the Front Clamping Sleeve ].
• Before tightening, align the exhaust system so that it is free of tension. Refer to => [ Exhaust System, Installing ] Service and Repair.
• Tighten the nuts evenly.
10 Center Muffler
• Original equipment as one unit with the rear muffler. For repairs, replace each separately.
• Separating point, refer to => [ Center and Rear Muffler, Separating ] Center and Rear Muffler, Separating.
• Install the exhaust system free of tension. Refer to => [ Exhaust System, Installing ] Service and Repair.
11 Suspended Mount
• Replace if damaged.
12 Bolt
• 23 Nm
13 Left Tailpipe
• Tightening specification: 60 Nm
• Aligning, refer to => [ Tailpipes, Replacing and Aligning ] Tailpipes, Replacing and Aligning.
14 Rear Muffler
• Original equipment as one unit with the center muffler.
• In case of repairs, the center muffler, rear muffler and tailpipe should be replaced individually.
• Separating point center muffler/rear muffler. Refer to => [ Center and Rear Muffler, Separating ] Center and Rear Muffler, Separating.
• Install the exhaust system free of tension. Refer to => [ Exhaust System, Installing ] Service and Repair.
15 Right Tailpipe
• Tightening specification: 60 Nm.
• Aligning, refer to => [ Tailpipes, Replacing and Aligning ] Tailpipes, Replacing and Aligning.
Installed Position of the Front Clamping Sleeve
• Threaded connections point toward the outside.