Center and Rear Muffler, Separating

Center and Rear Muffler, Separating

• A separating point has been provided in the connecting pipe for individual replacement of the center or rear muffler.

• The separating point is marked by a depression around the circumference of the exhaust pipe.

Special tools, testers and auxiliary items required

• Chain Pipe Cutter (VAS 6254)

Procedure

• Tightening specifications, refer to => [ Center and Rear Mufflers Overview ] Center and Rear Mufflers Overview.

- Separate the exhaust pipes at a right angle at the separating point - arrows - using the chain pipe cutter (VAS 6254).






- When installing, position the clamping sleeves - arrows - centrally on the separation point.






- Install the clamping sleeves so that the bolt ends do not project over the lower edge of the clamp. The clamping sleeve must not touch other components, even at extreme movements of the exhaust system.

- Install the exhaust system free of stress. Refer to => [ Exhaust System, Installing ] Service and Repair.