Reassembly

DOOR / HATCH: BACK DOOR: REASSEMBLY

1. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear Monitor) Installation

2. INSTALL REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper) Installation

3. INSTALL REAR WIPER MOTOR GROMMET (w/ Rear Wiper) Installation

4. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper) Installation

5. INSTALL REAR WIPER ARM HEAD CAP (w/ Rear Wiper) Installation

6. INSTALL REAR WASHER NOZZLE (w/ Rear Wiper) Installation

7. INSPECT REAR WASHER NOZZLE (w/ Rear Wiper) Washer Nozzle (for Rear Side)

8. ADJUST REAR WASHER NOZZLE (w/ Rear Wiper) (for Rear Side)

9. INSTALL REAR SPOILER ASSEMBLY Installation

10. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH Installation

11. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

12. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

13. INSTALL BACK DOOR STAY BOLT LH Installation

14. INSTALL BACK DOOR STAY BOLT RH

HINT
Use the same procedure for the RH side and LH side.

15. INSTALL BACK DOOR STAY ASSEMBLY LH Installation

16. INSTALL BACK DOOR STAY ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

17. INSTALL LOWER BACK DOOR STOPPER LH

(a) Install the lower back door stopper LH with the bolt.





18. INSTALL LOWER BACK DOOR STOPPER RH

HINT
Use the same procedure for the RH side and LH side.

19. INSTALL BACK DOOR LOCK STRIKER ASSEMBLY

(a) Using a T40 "TORX" socket wrench, install the back door lock striker assembly with the 2 screws.





Torque : 23 Nm (235 kgf-cm, 17 ft-lbf)

20. INSTALL LOWER BACK DOOR STOPPER CUSHION

(a) Engage the claws to install the 2 new lower back door stopper cushions.





21. INSTALL BACK DOOR LOCK STRIKER COVER

(a) Engage the 2 claws to install the back door lock striker cover.





22. INSTALL BACK DOOR TRIM BOARD

(a) Engage the 5 clips and 2 guides to install the back door trim board.





23. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

(a) Engage the 11 clips and 2 claws to install the back door panel trim assembly.





24. INSTALL BACK DOOR SIDE GARNISH LH

(a) Engage the 3 clips and 2 claws to install the back door side garnish LH.





25. INSTALL BACK DOOR SIDE GARNISH RH

(a) Engage the 3 clips and 2 claws to install the back door side garnish RH.





26. INSTALL UPPER BACK DOOR TRIM PANEL ASSEMBLY

(a) Engage the 4 clips and 4 claws to install the upper back door trim panel assembly.