Installation

INTERIOR: ROOF HEADLINING: INSTALLATION

INSTALLATION

1. INSTALL FRONT PILLAR GARNISH LH






(a) Install the new clip (A).
(b) Engage the 2 clips to install the front pillar garnish LH.
2. INSTALL FRONT PILLAR GARNISH RH
HINT: Installation of the front pillar garnish RH is the same as the front pillar garnish LH.

3. INSTALL REAR OUTER SEAT BELT ASSEMBLY Installation

4. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH Installation

5. INSTALL REAR OUTER SEAT BELT ASSEMBLY Installation

6. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH






(a) Install the new metal clip (B).
(b) Engage the 4 clips to install the roof side garnish assembly inner LH.
7. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER RH
HINT: Installation of the roof side garnish assembly inner RH is the same as the roof side garnish assembly inner LH.

8. CENTER SPIRAL CABLE Installation

9. INSTALL STEERING WHEEL ASSEMBLY Installation

10. INSTALL HORN BUTTON ASSEMBLY Installation

11. INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH
(a) Install the front seat outer belt assembly RH with the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
12. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH
(a) Install the front seat outer belt assembly LH with the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
13. INSTALL REAR SEATBACK ASSEMBLY
Installation
14. INSTALL FRONT SEAT ASSEMBLY RH Installation

15. INSTALL FRONT SEAT ASSEMBLY LH Installation

16. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
17. PERFORM INITIALIZATION
(a) Some systems need initialization when disconnecting the cable from the negative battery terminal.
HINT:


18. INSPECT STEERING PAD
HINT:
Steering Pad

19. INSPECT SRS WARNING LIGHT
HINT:
Diagnosis System