Installation

SEAT: FRONT SEAT ASSEMBLY (for Power Seat): INSTALLATION

INSTALLATION

1. INSTALL FRONT LH SEAT ASSEMBLY






(a) Connect the connectors.
(b) Connect the negative battery terminal.
(c) Move the front LH seat assembly to the rearmost position by operating the slide & vertical power seat switch knob.
(d) Tighten the 2 bolts on the front side of the front LH seat assembly.
Torque: 37 Nm (377 kgf-cm, 27 ft-lbf)
(e) Move the front LH seat assembly fully forward by operating the slide & vertical power seat switch knob.
(f) Tighten the 2 bolts on the rear side of the front LH seat assembly.
Torque: 37 Nm (377 kgf-cm, 27 ft-lbf)
2. PERFORM SYSTEM INITIALIZE
HINT:


3. INSPECT POWER SEAT CONTROL SYSTEM
HINT:
On-Vehicle Inspection

4. CHECK SEAT HEATER SYSTEM (w/ Seat Heater System)
HINT:
Seat Heater System

5. INITIALIZE FRONT PASSENGER OCCUPANT CLASSIFICATION SYSTEM (for Front Passenger Seat)
HINT:
Programming and Relearning

6. INSPECT SRS WARNING LIGHT
HINT:
Diagnosis System