Component Tests and General Diagnostics
Tc TERMINAL CIRCUITCIRCUIT DESCRIPTION
By connecting terminals Tc and E, of the DLC1 or DLC2, the center airbag sensor assembly is set in the DTC output mode. The DTC are displayed by the blinking of the SRS warning light.
WIRING DIAGRAM
INSPECTION PROCEDURE
Step 1:
Step 2:
Step 3:
Step 4:
HINT: If the DTC is not displayed, do the following troubleshooting.
Step 1:
HINT: If the DTC is displayed without a DTC check procedure, do the following troubleshooting.