Removal

OTHER SYSTEM: CLOCK: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal
2. REMOVE BATTERY SERVICE HOLE COVER LH Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
7. REMOVE NO. 3 BOX PANEL Removal
8. REMOVE REAR UPPER CONSOLE PANEL Removal
9. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
10. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET Removal
11. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET Removal





12. REMOVE CLOCK ASSEMBLY
(a) Using a screwdriver, detach the 2 claws and remove the clock.
HINT: Tape the screwdriver tip before use.