Removal

AUDIO / VISUAL: RADIO RECEIVER: REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal
2. REMOVE BATTERY SERVICE HOLE COVER LH Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
7. REMOVE NO. 3 BOX PANEL Removal
8. REMOVE REAR UPPER CONSOLE PANEL Removal
9. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
10. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET





(a) Remove the 2 bolts.





(b) Pull the radio receiver to detach the 4 clips on the backside of the radio receiver.
(c) Disconnect the connectors and remove the radio receiver.





11. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
(a) Detach the 5 clips and remove the panel.





12. REMOVE NO. 2 RADIO BRACKET
(a) Remove the 4 bolts and bracket.





13. REMOVE NO. 1 RADIO BRACKET
(a) Remove the 4 bolts and bracket.