Rear Shelf: Service and Repair

Parcel Shelf

Removal
1 Remove the rear seat backrest. For additional information, refer to Rear Seat Backrest Rear Seat Backrest




2 Release the parcel tray.
- Remove the 2 Torx bolts.




3 Release the rear safety belts.
- Remove and discard the 2 safety belt lower anchor nuts.




4 Remove the rear safety belt trim panel.
- Release from the 3 clips.
- Release from the safety belts.
5 Remove the parcel tray.
- Release from the safety belts.




6
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the 2 child seat mounting trim panels.
- Release from the 4 clips.

Installation
1 Install the 2 child seat mounting trim panels.
- Secure in the clips.
2 Install the parcel tray.
- Position safety belts through apertures.
3 Install the rear safety belt trim panel.
- Attach the safety belts.
- Secure in the clips.
4 Secure the rear safety belts.
- Install new nuts and tighten to 30 Nm (22 lb.ft).
5 Secure the parcel tray.
- Tighten the Torx bolts to 6 Nm (4 lb.ft).
6 Install the rear seat backrest. For additional information, refer to Rear Seat Backrest Rear Seat Backrest