Rear Seat Backrest

Rear Seat Backrest

Removal
1 Remove the LH rear seat cushion. For additional information, refer to Rear Seat Cushion Rear Seat Cushion
2 Repeat the above procedure for the RH seat cushion.
3 Remove the auxiliary junction box access cover.
- Release the clip.




4 Remove the rear seat backrest.
- Remove the 2 Torx bolts.
- Release from the 2 retainers.

Installation
1 Install the rear seat backrest.
- Secure in the retainers.
- Tighten the Torx bolt to 10 Nm (7 lb.ft).
2 Install the auxiliary junction box access cover.
- Align the pegs and secure the clip.
3 Install the LH rear seat cushion. For additional information, refer to Rear Seat Cushion Rear Seat Cushion
- Secure with the clips.
4 Install the RH rear seat cushion.