Removal and Installation

BRAKE POWER SUPPLY BACKUP UNIT

Removal and Installation


REMOVAL

1.Disconnect 12V battery cable from negative terminal. Removal and Installation.
2.Remove trunk side finisher LH. Trunk Side Finisher.
3.Hang fuse box in a place where it will not interfere with work.
4.Disconnect brake power supply backup unit harness connector.
5.Remove brake power supply backup unit, bracket and brake power supply backup unit bracket.

CAUTION:
Never drop removed parts.
6.Remove bracket and brake power supply backup unit bracket from brake power supply backup unit.

INSTALLATION

Install in the reverse order of removal.