Inspection of ABS Warning Lamp, VDC Off Indicator Lamp, Slip Indicator Lamp and Brake Warning Lamp

INSPECTION OF ABS WARNING LAMP, VDC OFF INDICATOR LAMP, SLIP INDICATOR LAMP AND BRAKE WARNING LAMP





1. Make sure that ABS warning lamp illuminates when ignition switch is turned ON. If it does not illuminate, inspect ABS warning lamp and circuit, and inspect combination meter. Refer to DI-4, "COMBINATION METERS".
2. Make sure that VDC OFF indicator lamp illuminates when ignition switch is turned ON. If it does not illuminate, inspect VDC OFF indicator lamp and circuit, and inspect combination meter. Refer to DI-4, "COMBINATION METERS".
If VDC OFF indicator lamp does not illuminate, inspect VDC OFF switch and circuit first time. Refer to BRC-52, "VDC OFF SWITCH". VDC Off Switch
3. Make sure that SLIP indicator lamp illuminates when ignition switch is turned ON. If it does not turn on, check SLIP indicator lamp and circuit, and inspect combination meter. Refer to DI-4, "COMBINATION METERS".
4. With engine running, turn VDC OFF switch ON and OFF. Check that VDC OFF indicator lamp turns ON and OFF. If indicator lamp does not turn ON and OFF in accordance with switch over of VDC OFF switch, inspect VDC OFF switch and circuit. Refer to BRC-52, "VDC OFF SWITCH". VDC Off Switch
5. With VDC OFF switch OFF (not operating), make sure that VDC OFF indicator lamp turns off after engine starts. If VDC OFF indicator lamp does not turn OFF after 10 seconds have passed since engine-start, perform self-diagnosis of VDC/TCS/ABS control unit. Refer to BRC-25, "Self-Diagnosis". Self-Diagnosis
Be sure to erase memory after performing self-diagnosis. Refer to BRC-26, "ERASE MEMORY". Clearing Diagnostic Trouble Codes