Clearing Diagnostic Trouble Codes
ERASE MEMORY1. Turn ignition switch OFF.
2. Start the engine and touch "SELF-DIAG RESULTS", "ERASE MEMORY" in order on the CONSULT-II screen to erase the error memory.
CAUTION: If the error memory is not erased, perform applicable diagnosis.
3. Perform self-diagnosis again, and make sure that diagnostic memory is erased.
4. Drive vehicle at 30 km/h (19 MPH) or more for approximately 1 minute as the final inspection, and make sure that the ABS warning lamp, VDC OFF indicator lamp and SLIP indicator lamp turn off.