Battery Condition Monitor: Service and Repair

BCM (Battery Condition Monitor) Module Removal/Installation

NOTE: Put on gloves to protect your hands from electrical shock.

IMA components are located in this area. The IMA is a high-voltage system. You must be familiar with the IMA system before working on or around it. Make sure you have read the IMA service precautions before doing repairs or service. High Voltage Safety

1. Remove the IPU lid. IPU (Intelligent Power Unit) Lid Removal/Installation

2. Disconnect BCM module connectors (A).

3. Remove the BCM module (B).

4. Install the parts in the reverse order of removal.