IPU (Intelligent Power Unit) Lid Removal/Installation

IPU (Intelligent Power Unit) Lid Removal/Installation

NOTE: Put on gloves to protect your hands from electrical shock.

IMA components are located in this area. The IMA is a high-voltage system. You must be familiar with the IMA system before working on or around it. Make sure you have read the IMA service precautions before doing repairs or service. High Voltage Safety

1. Remove the rear seat-back and the rear seat cushion. Rear Seat Removal/Installation

2. Turn the battery module switch OFF. High Voltage Safety

3. Remove the bolts (A) and (B).

4. Remove the IPU lid (C).

5. Install the parts in the reverse order of removal.






6. Before the battery module switch is turned ON, make sure all the high voltage circuits are connected properly. Then push the button (A), and turn the battery module switch ON.