Backrest Cover and Backrest Cushion for Individual Power Rear Seat, Separating and Connecting

Backrest Cover and Backrest Cushion for Individual Power Rear Seat, Separating and Connecting

Special tools, testers and auxiliary items required

• Upholstery clip pliers (V.A.G 1634)

Removing






- Remove backrest cover together with backrest cushion. Refer to => [ Backrest Cover with Backrest Cushion for Individual Power Rear Seat ] Backrest Cover with Backrest Cushion for Individual Power Rear Seat.

- Pull off backrest cover - 1 - from the backrest cushion - 2 - as far as possible and cut upholstery clips - 3 - using pliers.

Installing

Install in reverse order of removal. Note the following:

- Ensure that the backrest cover is situated free of wrinkles.

- Install new upholstery clips using upholstery clip pliers (V.A.G 1634).

Installation note: For example tightening specifications, replace components. Refer to => [ Backrest Cover and Backrest Cushion for Individual Power Rear Seat Assembly Overview ] Backrest Cover and Backrest Cushion for Individual Power Rear Seat Assembly Overview.