Backrest Cover

Backrest Cover

• Removal and installation can be done with front seat installed.

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Vehicles with rear seat entertainment: Remove rear seat entertainment mount. Refer to => [ Rear Seat Entertainment Mount ] Rear Seat Entertainment Mount.

- Unclip trim - 1 - using the trim removal wedge (3409) - arrows - and remove.

- Detach left and right rubber strap - 1 - at the bottom of the seat pan.






- Remove the bolts - 2 -.

- Pull off backrest cover in upward direction.

Installing

Install in reverse order of removal. Note the following:

- Forcefully press backrest cover in the direction of the backrest until the retaining clips engage audibly.

- Check if the backrest cover is correctly latched.

Installation note: For example tightening specifications, replace components => [ Backrest Assembly Overview ] Backrest Assembly Overview.