Backrest Assembly Overview

Backrest Assembly Overview






1 Seat Pan

2 Bolt

• Quantity: 4

• Self-locking

• Always replace if removed

• Threaded holes for screws must be cleaned, for example, with thread cutter

• 33 Nm

3 Trim

• For backrest hinge trim on tunnel side

• Removing and Installing, refer to => [ Backrest Hinge Trim ] Backrest Hinge Trim

4 Backrest

• Removing and Installing, refer to => [ Backrest ] Backrest

5 Headrest

• Removing and Installing, refer to => [ Power Headrests ] Power Headrests

6 Trim

• For backrest cover

• Removing and Installing, refer to => [ Backrest Cover ] Backrest Cover

7 Bolt

• Quantity: 2

• 6,5 Nm

8 Bolt

• Quantity: 2

• 6.5 Nm

9 Bracket

• For backrest cover

• Removing and Installing, refer to => [ Backrest Cover Bracket ] Backrest Cover Bracket

10 Backrest cover

• Removing and Installing, refer to => [ Backrest Cover ] Backrest Cover

11 Rubber strap

• Quantity: 2

• with hooks

12 Trim

• For sill side backrest hinge

• Removing and Installing, refer to => [ Backrest Hinge Trim ] Backrest Hinge Trim

13 Expanding Rivet

14 Wiring harness

• From the side airbag to the connector station

• Depending on the vehicle version, there may be more wiring harnesses, such as for the backrest heating

15 Bolt

• 10 Nm

16 Belt guide

• Removing and Installing, refer to => [ Seat Belt Guide ] Seat Belt Guide

17 Pneumatic Line

• To the multi-contour seat compressor

• Depending on vehicle version, there may be even more pneumatic lines, such as for side panel adjustment.