Removal and Installation

Shift Mechanism, Manual Transmission

Removing

- Remove the front center console.

- Remove the bolts - arrows - and the shift mechanism.





- Remove the lock washers - 1 through 4 - and the shift cable and selector cable from the shift mechanism housing.





Installing

Install in reverse order, paying attention to the following:

• Replace the lock washers - 3 and 4 -.

- Insert the shift mechanism and tighten the bolts - arrows -.





• Bolt tightening specification - arrows -: 20 Nm

- Install the front center console.

- Adjust shift mechanism. Refer to => [ Shift Mechanism, Manual Transmission, Adjusting ] Adjustments.