Balance Shaft Assembly Overview

Balance Shaft Assembly Overview





1 Balance Shaft

• Removing and installing, refer to => [ Balance Shaft ] Balance Shaft

2 Bolt

• 60 Nm

• To loosen and fasten, use drill bit 8 mm dia. as counter-holder

3 Balance Shaft Transmission Side

• Can only be placed on the balance shaft in one position

4 Bearing End Bracket

5 Bolt

• 13 Nm

• Bolt class 10.9

6 Balance Shaft Belt Pulley Side

• Can only be placed on the balance shaft in one position

7 Bolt

• 60 Nm

• To loosen and fasten, use drill bit 8 mm dia. as counter-holder