Pendulum Support

Pendulum Support

Removing

- Remove noise insulation in center by loosening fasteners - 1 through 4 -.





- Remove bolts - 1 through 3 - and remove pendulum support.





Installing

Install in reverse order, paying attention to the following:

• Tightening specifications, refer to => [ Subframe Mount Assembly Overview ] Description and Operation.

• The holes for the pendulum support on transmissions from 05.28.07 have threaded inserts (for example HeliCoil).





• How to recognize: collar on the first thread - arrow -.

• Note the correct mounting bolts and tightening specifications => [ Bolts ] Description and Operation.

- First tighten pendulum support on transmission - arrow B - and - arrow C - and then on subframe - arrow A -.