Transmission Mount: Description and Operation

Subframe Mount Assembly Overview






1 Bolt

• Replace

• 60 Nm plus an additional 90° turn

• Transmission console to transmission

2 Bolts

• Pendulum support to transmission

• In the case of 02Q manual transmissions, threaded inserts (HeliCoil) can be installed in the threads of the pendulum support threaded connection. These threaded inserts are standard as of transmission build date 5/28/07.

• Difference

• Bolts with strength category 10.9 must be used for all transmissions with threaded inserts (HeliCoil).

• In the case of transmissions without threaded inserts, bolts with strength category 8.8 are to be used.

• Bolts with strength category 8.8 are listed in the, refer to the electronic parts catalog ETKA to VIN 8J-7-050 000.

• Bolts with strength category 10.9 are listed in the, refer to the electronic parts catalog ETKA from VIN 8J-8-000 001.

• The bolt tightening specification corresponds to the strength category.

• Transmission with threaded inserts in connection with bolts of strength category 10.9:

• 50 Nm plus an additional 90° turn

• Transmission without threaded inserts and bolts with strength category 8.8:

• Always replace

• 40 Nm plus an additional 90° turn

3 Engine Support

4 Bolt

• Engine support to engine

5 Engine Mount

6 Bolt

• Engine mount to body

7 Connecting Bar

8 Bolt

• Connecting bar to engine

9 Bolt

• Connecting bar to body

10 Bolt

• Engine mount to body

11 Bolts

• Engine mount to engine support

12 Pendulum Support

• Removing and installing, refer to => [ Pendulum Support ] Pendulum Support

13 Bolt

• Replace

• 100 Nm plus an additional 90° turn

• Pendulum support to subframe

14 Bolt

• Replace

• 60 Nm plus an additional 90° turn

• Transmission mount to transmission console

15 Bolt

• Replace

• 40 Nm plus an additional 90° turn

• Transmission mount to body

16 Transmission Mount

• Removing, refer to => [ Transmission Mount, Removing ] Transmission Mount, Removing

• Installing, refer to => [ Transmission Mount, installing ] Transmission Mount, installing

17 Bolt

• Transmission console to transmission

• 60 Nm plus an additional 90° turn

• Replace

18 Transmission Bracket

Transmission with Threaded Inserts (for example HeliCoil) for Securing the Pendulum Support





• The holes for the pendulum support from transmission build date 5/28/07 always have threaded inserts (for example HeliCoil).

• How to recognize: collar on the first thread - arrow -.

• Different securing bolts and tightening torques - 2 -.