Part 2

Part 2

Replace the O-rings and seals.

Make sure the couplings are tight.

Tightening specifications:

M6 bolts: 10 Nm

M8 bolts: 20 Nm






1 Automatic Transmission Fluid (ATF) Pre-Heater

2 Shut-Off Valve for the Cylinder Block

3 Coolant Expansion Tank

4 Engine Coolant Circulation Pump 2 (V178)

• Removing and installing, refer to => [ Engine Coolant Circulation Pump 2 V178 ] Service and Repair.

5 ATF Pre-Heater Shut-Off Valve