Removal (from 07/2011)

1NZ-FE ENGINE CONTROL: AIR FUEL RATIO SENSOR (for Hatchback): REMOVAL

1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Removal (from 07/2011)

2. REMOVE FRONT NO. 1 VENTILATOR SEAL Removal (from 07/2011)

3. REMOVE FRONT AIR SHUTTER SEAL RH Removal (from 07/2011)

4. REMOVE INNER COWL TOP TO COWL BRACE Removal (from 07/2011)

5. REMOVE OUTER COWL TOP PANEL Removal (from 07/2011)

6. REMOVE AIR FUEL RATIO SENSOR

(a) Disconnect the air fuel ratio sensor connector.





(b) Disengage the clamp and disconnect the air fuel ratio sensor wire from the wire harness clamp bracket.

(c) Using SST, remove the air fuel ratio sensor.





SST : 09224-00010