Removal

P410 HYBRID TRANSMISSION / TRANSAXLE: MOTOR CABLE: REMOVAL

1. PRECAUTION

HINT
Service Precautions

2. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Removal

3. REMOVE REAR DECK FLOOR BOX Removal

4. REMOVE REAR NO. 3 FLOOR BOARD Removal

5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. REMOVE SERVICE PLUG GRIP Removal

7. REMOVE FRONT SPOILER COVER (w/ Front Spoiler)

8. REMOVE ENGINE UNDER COVER (w/ Cover)

9. REMOVE NO. 1 ENGINE UNDER COVER

10. DRAIN COOLANT (for Inverter) Coolant (for Inverter)

11. REMOVE RADIATOR SUPPORT OPENING COVER Removal

12. REMOVE NO. 1 INVERTER BRACKET Removal

13. DISCONNECT ENGINE ROOM MAIN WIRE Removal

14. REMOVE INVERTER TERMINAL COVER Removal

15. CHECK TERMINAL VOLTAGE Removal

16. DISCONNECT FRAME WIRE Removal

17. DISCONNECT HIGH VOLTAGE CABLE OF FRONT TRANSAXLE Removal

18. DISCONNECT NO. 2 ENGINE WIRE Removal

19. INSTALL INVERTER TERMINAL COVER Removal

20. DISCONNECT NO. 2 ENGINE ROOM WIRE Removal

21. DISCONNECT WATER HOSE Removal

22. REMOVE INVERTER WITH CONVERTER ASSEMBLY Removal

23. REMOVE INVERTER RESERVE TANK ASSEMBLY Removal

24. REMOVE INVERTER TRAY BRACKET Removal

25. REMOVE MOTOR CABLE

NOTICE:
Wear insulated gloves.

(a) Disconnect the 3 clamps.

(b) Remove the 2 bolts and slide the motor cable connector shell back.

(d) Remove the 3 bolts and motor cable from the hybrid transaxle assembly.