Removal

P410 HYBRID TRANSMISSION / TRANSAXLE: GENERATOR CABLE: REMOVAL

1. PRECAUTION

HINT
Service Precautions

2. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Removal

3. REMOVE REAR DECK FLOOR BOX Removal

4. REMOVE REAR NO. 3 FLOOR BOARD Removal

5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. REMOVE SERVICE PLUG GRIP Removal

7. REMOVE FRONT SPOILER COVER (w/ Front Spoiler)

8. REMOVE ENGINE UNDER COVER (w/ Cover)

9. REMOVE NO. 1 ENGINE UNDER COVER

10. DRAIN COOLANT (for Engine) Coolant (for Engine)

11. DRAIN COOLANT (for Inverter) Coolant (for Inverter)

12. REMOVE RADIATOR SUPPORT OPENING COVER Removal

13. REMOVE NO. 1 INVERTER BRACKET Removal

14. DISCONNECT ENGINE ROOM MAIN WIRE Removal

15. REMOVE INVERTER TERMINAL COVER Removal

16. CHECK TERMINAL VOLTAGE Removal

17. DISCONNECT FRAME WIRE Removal

18. DISCONNECT HIGH VOLTAGE CABLE OF FRONT TRANSAXLE Removal

19. DISCONNECT NO. 2 ENGINE WIRE Removal

20. INSTALL INVERTER TERMINAL COVER Removal

21. DISCONNECT NO. 2 ENGINE ROOM WIRE Removal

22. DISCONNECT WATER HOSE Removal

23. REMOVE INVERTER WITH CONVERTER ASSEMBLY Removal

24. REMOVE INVERTER RESERVE TANK ASSEMBLY Removal

25. REMOVE INVERTER TRAY BRACKET Removal

26. REMOVE RADIATOR PIPE

(a) Disconnect the clamps, No. 1 radiator hose, No. 4 water by-pass hose and No. 3 radiator hose.

(b) Remove the 2 bolts and radiator pipe.

27. REMOVE GENERATOR CABLE

NOTICE:
Wear insulated gloves.

(a) Disconnect the generator cable clamp from the motor cable bracket.

(b) Remove the 3 bolts and slide the generator cable connector shell back.

(d) Remove the 3 bolts and generator cable from the hybrid transaxle assembly.