Removal

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ECU: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Removal

3. REMOVE REAR DECK FLOOR BOX Removal

4. REMOVE REAR NO. 3 FLOOR BOARD Removal

5. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY Removal

7. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal

8. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

9. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal

10. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET Removal

11. REMOVE NO. 1 RADIO BRACKET Removal

12. REMOVE NO. 2 RADIO BRACKET Removal

13. REMOVE EXTENSION MODULE

(a) Disconnect each connector to remove the navigation wire.





(b) Disconnect the connector to remove the extension module.