Removal

LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: REMOVAL

1. REMOVE REAR BUMPER ASSEMBLY Removal

2. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Removal

3. REMOVE REAR DECK FLOOR BOX Removal

4. REMOVE REAR NO. 3 FLOOR BOARD (for RH Side) Removal

5. REMOVE REAR NO. 4 FLOOR BOARD (for LH Side) Removal

6. REMOVE DECK FLOOR BOX LH (for LH Side) Removal

7. REMOVE REAR DOOR SCUFF PLATE Removal

8. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP Removal

9. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal

10. REMOVE REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY Removal

11. REMOVE REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY Removal

12. REMOVE REAR NO. 1 FLOOR BOARD Removal

13. REMOVE DECK TRIM SERVICE HOLE COVER Removal

14. REMOVE REAR DECK TRIM COVER Removal

15. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

16. REMOVE REAR SIDE SEATBACK ASSEMBLY LH (for LH Side) Removal

17. REMOVE REAR SIDE SEATBACK ASSEMBLY RH (for RH Side)

HINT
Use the same procedure described for the LH side.

18. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side) Removal

19. REMOVE TONNEAU COVER HOLDER CAP (for LH Side) Removal

20. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) Removal

21. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY (for RH Side)

HINT
Use the same procedure described for the LH side.

22. REMOVE TONNEAU COVER HOLDER CAP (for RH Side)

HINT
Use the same procedure described for the LH side.

23. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) Removal

24. REMOVE REAR COMBINATION LIGHT ASSEMBLY

(a) Disconnect the connector.





(b) Remove the 2 nuts.

(c) Disengage the 2 clips and guide, and remove the rear combination light assembly as shown in the illustration.