Removal

EXTERIOR PANELS / TRIM: REAR BUMPER: REMOVAL

1. REMOVE REAR BUMPER ASSEMBLY

(a) Put protective tape around the rear bumper assembly.





Text in Illustration





(b) Remove the 2 screws and 2 rear bumper upper stoppers.





(c) Using a clip remover, remove the 9 clips.





(d) Remove the nut.

(e) Remove the screw.





HINT
Use the same procedure for the RH side and LH side.

(f) Disengage the claw.

HINT
Use the same procedure for the RH side and LH side.

(g) Disengage the 5 claws.





HINT
Use the same procedure for the RH side and LH side.

(h) Disengage the 4 claws and remove the rear bumper assembly as shown in the illustration.