Removal

LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal notices before proceeding with work Service Precautions.

2. REMOVE REAR NO. 2 FLOOR BOARD (for Separate Type) Removal

3. REMOVE REAR DECK FLOOR BOX Removal

4. REMOVE REAR NO. 3 FLOOR BOARD Removal

5. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. REMOVE FRONT BUMPER ASSEMBLY

Removal

7. REMOVE HEADLIGHT ASSEMBLY

(a) Remove the bolt and 2 screws.

(b) Using a screwdriver wrapped with protective tape, disengage the claw.

Text in Illustration

(d) Disconnect each connector and remove the headlight assembly.