Installation

LIGHTING (EXT): HEADLIGHT ASSEMBLY: INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY

(a) Connect each connector.

(b) Engage the clamp.

(d) Install the headlight assembly with the bolt and 2 screws.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

2. INSTALL FRONT BUMPER ASSEMBLY

Installation

3. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INSTALL REAR NO. 3 FLOOR BOARD Installation

5. INSTALL REAR DECK FLOOR BOX Installation

6. INSTALL REAR NO. 2 FLOOR BOARD (for Separate Type) Installation

7. ADJUST HEADLIGHT AIMING

Adjustments

8. ADJUST FOG LIGHT AIMING (w/ Fog Light)

Adjustments