Installation

LIGHTING (EXT): HEIGHT CONTROL SENSOR: INSTALLATION

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

(a) Engage the guide and install the rear height control sensor sub-assembly with the 3 bolts.





Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the connector.

2. INSTALL REAR WHEEL Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INSTALL REAR NO. 3 FLOOR BOARD Installation

5. INSTALL REAR DECK FLOOR BOX Installation

6. INSTALL REAR NO. 2 FLOOR BOARD (for Separate Type) Installation

7. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

Initialization

8. PREPARE VEHICLE FOR HEADLIGHT AIM ADJUSTMENT Adjustments

9. PREPARE FOR HEADLIGHT AIMING (Using a headlight aim test machine) Adjustments

10. PREPARE FOR HEADLIGHT AIMING (Using a screen) Adjustments

11. INSPECT HEADLIGHT AIMING Adjustments

12. ADJUST HEADLIGHT AIMING Adjustments